Chevrolet California P324B Code:

OBD-II Diagnostic Powertrain (P) Trouble Code

Trouble In Chevrolet California P324B Possible Cause

Chevrolet California P324Bcode will be stored and a malfunction indicator lamp may be illuminated. Some vehicles will require multiple failure cycles in order for the malfunction indicator lamp to be illuminated.

Common Symptoms For Chevrolet California P324B

  1. Some applications also utilize the inlet door to regulate air flow through the intake tube by adjusting the degree to which the door opens according to throttle position
  2. Engine and transmission ground cables, straps, and wires are sometimes left dangling after repairs are performed
  3. Several tools will be instrumental in successfully diagnosing this code
  4. There are several tools which will be instrumental in attempting to successfully diagnose the conditions which contribute to this code being stored

Similar Problems

Fuel And Air Metering
IC Circuit High Voltage
TFP Valve Position Switch-Drive Without Drive Ratio

Chevrolet California P324B Troubleshooting

If this is the case with the code, you will be hearing very loud noises, like explosions, from the rear of the vehicle upon acceleration. Firstly check the carburetor to ensure that the fuel and air combination are properly balanced. If these settings are correct, then thoroughly inspect the distributor cap for any cracks or hairline splits, as this can produce a backfire. Move on to the spark plugs and ensure that they are clean and undamaged and inspect the engine gaskets for any sign of damage, as they are responsible for ensuring the correct gas exchange within the engine. Chevrolet California P324B OBD2 specifically refers to the camshaft (cam) timing. In this case, if the cam timing is over-retarded, the engine light will be illluminated and the code will be set.

How to turn off Chevrolet California P324B check engine light ?

There are two ways to turn off the check engine light:

A repair technician can do so once repairs have been made.
The OBD II can automatically turn it off when it fails to detect the problem after several diagnostic cycles.

EngineTroubles.com Logo

Copyright © 2017 | https://www.enginetroubles.com | All Rights Reserved.