Ferrari 328 C0079 Code:

OBD-II Diagnostic Chassis (C) Trouble Code

Trouble In Ferrari 328 C0079 Possible Cause

Ferrari 328 C0079code will be stored and a malfunction indicator lamp may be illuminated. Some vehicles will require multiple failure cycles in order for the malfunction indicator lamp to be illuminated.

Common Symptoms For Ferrari 328 C0079

  1. A suitable OBD-II scanner (or code reader) and a digital volt/ohmmeter will be most helpful in trying to perform a successful diagnosis
  2. This code is more likely the cause of a lack of fuel pressure rather than a reaction to it
  3. Some applications are equipped with up to 18 separate control modules. If you choose to tackle this monumental task, begin with a careful visual inspection of all system circuitry, connectors, and fuses
  4. Controller failure is rare and will likely require reprogramming. Installing high performance exhaust systems (with no catalytic converters) can also cause this code to be set due to the lack of exhaust system back pressure

Similar Problems

Accelerator Pedal Position (APP) Sensor 1 Performance
Cruise Control Servo Indicates Low
TFP Valve Position Switch-Drive Without Drive Ratio

Ferrari 328 C0079 Troubleshooting

If there is a clicking noise when you attempt to start the engine and the engine does not crank, it typically means there is something wrong with the battery, such as a low or discharged battery or corroded or loose battery cables. If the engine cranks when you attempt to start the car, but fails to turn over, this may mean there is a problem with the fuel or ignition. Other common reasons an engine may fail to start include a failure of the starter motor relay, a clogged fuel filter, a defective fuel pump or an ignition switch failure. Ferrari 328 C0079 the main thing to check is to verify the operation of the VCT solenoid. You're looking for a sticking or stuck VCt solenoid valve caused by contamination. Refer to vehicle specific repair manual to perform component tests for the VCT unit.

How to turn off Ferrari 328 C0079 check engine light ?

There are two ways to turn off the check engine light:

A repair technician can do so once repairs have been made.
The OBD II can automatically turn it off when it fails to detect the problem after several diagnostic cycles.

EngineTroubles.com Logo

Copyright © 2017 | https://www.enginetroubles.com | All Rights Reserved.